Design of a Monitoring and Control Systems Based on HMI-PLC for a Wastewater Treatment Pilot Plant
DOI:
https://doi.org/10.29105/mdi.v8i12.240Keywords:
Supervisory Control and Data Acquisition (SCADA), Graphical User Interface (GUI), Human Machine Interface (HMI), Programmable Logic Controller (PLC)Abstract
This work focuses on the design of a control and monitoring system for a pilot level wastewater treatment plant. Programming in ladder language was developed, and the S7-200 Siemens PLC was used. The design of the Graphical User Interfaces (GUI) were carried out with Siemens WinCC Flexible 2008 software, which will allow interaction with the user. The HMI used is a Siemens MP277 Panel, which interfaces with the PLC allowing real-time monitoring of the control stages. The basic control rules were implemented to ensure the protection of the process. The operation of the control and monitoring system was verified by simulation, afterwards, physical tests were performed to observe the behavior of the controller when performing a work cycle using a synthetic water.
References
A.Sánchez. (2003). Design and Implementation of a Real-Time Control Platform for the Testing of Advanced Control Systems and Data Quality Management in the Wastewater Industry. The Fourth International Conference on Control and Automation (ICCA’03), 431-435.
Bolton, W. (1996). Programmable logic controllers. En W. Bolton. ISBN: 9780750681124: Newnes.
Fernández, B. (2013). Testing & verification of PLC code for process control. Proceedings of ICALEPCS2013, San Francisco, CA, USA, 1258-1261.
Festo, D. T. (2013). EL mundo se mueve con agua. Tecno Aqua, 104-107.
Jairo o Panneso. (1995). Automatización de plantas de tratamiento de agua. Energia y Computación, 49-55.
JASMIN DZINIC, C. Y. (2013). Simulation-based verification of PLC. Master of Science Thesis in Production Engineering. Gothenburg, Sweden: CHALMERS UNIVERSITY OF TECHNOLOGY.
Kumar, E. R. (2016). Effluent treatment plant using PLC. International Journal of Engineering Research and General Science, 58-65.
Lugo, J. G. (2005). Metodología para realizar una automatización utilizando PLC. Impulso, Revista de electronica, electrica y sistemas computacionales, 18-21.
Ponsa, P. D. (2006). Creación de guía ergonómica para el diseño de interfaz de supervisión. In VII Congreso Internacional de Interacción Persona-Ordenado - Puertollano.
SIEMENS. (2008). Manual del sistema de automatización S7-200. SIMATIC - SIEMENS AG, 6ES7298--8FA24--8DH0.
Simmonds-Mendoza, A. (2018). Implementación de control PID de nivel en laboratorio usando PLC Siemens S7-300. Revista UIS Ingenierías, 159-178.
Smith, C. A. (1991). Control automático de procesos teoría y práctica. Editorial limusa, S.A. de C.V.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
